SAE100-R2-EN853-2SN-1

Hydraulic Hoses Are Prone To Failure During Use

Hydraulic Hoses Are Prone To Failure During Use   Hydraulic hoses are prone to some problems during use, but some friends don’t know what the reason is, let me tell you below. 1. Under frequent, violent pressure shocks. The hydraulic hose assembly showed a burst condition, not caused by receiving too much static pressure, but…

Details
hydraulic-hoses1

Routine Maintenance Of Hydraulic Hoses

Routine Maintenance Of Hydraulic Hoses   There are many reasons why hydraulic hoses can fail, but with proper precautions, some of the most common failures can be avoided. 1. Fluid compatibility Incompatible fluids will cause deterioration, swelling and delamination of the inner rubber layer of the hydraulic hose assembly. In some cases, the inner rubber…

Details
PU helix duct hose (5)

PVC / PU Helix Duct Hose difference

PVC / PU Helix Duct Hose Difference   PVC Helix Duct Hose is a transparent plastic hose reinforced with a rigid plastic skeleton produced by PVC material. PU Helix Duct Hose is a full plastic pipe produced by polyurethane PU material. From the appearance, many customers Can’t be distinguished. So what is the difference between…

Details
aeration-hose-4

Introduction of Aeration Hose

Introduction of Aeration Hose   The aeration hose is a new type of tubular rubber aerator developed by our company. This product is mainly used for aeration of urban sewage and organic industrial wastewater treatment systems. It has a simple structure, high oxygen utilization rate, reliable performance, and difficult air holes. Features such as clogging,…

Details
steam-hose

High temperature resistant steam hose

High temperature resistant steam hose   For hot water and saturated steam, general high-pressure rubber hoses do not work well. However, high temperature resistant steam hoses with braided steel wire reinforcements can provide a good solution. It is mainly used to transport steam. The hose is very flexible and resistant to vibration. Transfers saturated steam…

Details
SAE R1 (2)

Installation precautions for hydraulic hose fittings

Installation precautions for hydraulic hose fittings   In the hydraulic system, whether it is a metal pipe joint or a hose joint, there is a problem that leakage is easy to occur. For ferrule type pipe joints, most of the pipe is subject to large external or impact forces, which will cause the ferrule to…

Details