Rubber hose is one of the most common tools in our daily life. In agriculture, we use rubber pipe to deliver water. While in a flood, we use rubber tube to discharge the water. While in an oil deliver line, we need rubber oil hose to deliver petroleum, diesel, etc. However, in some big project, we have to use large diameter rubber hose. Because only a LDH hose can meet the fluid volume demand.
We often use large diameter hoses to transport oil, water, ethanol, fuel, etc. While we do this in a ling distance. Some hoses are on the ground. But most of them are buried underground. Thus it will be very hard to maintain these hoses. Therefore, we have to take some measures to prolong the service life.
Correctly use the large diameter hose for a longer service life
First of all, the temp of the medium should be between -40℃ and +120℃. Otherwise the service life of the large diameter hose will reduce. In addition, never use the rubber hose assembly when the bending radius is smaller than the hose. Otherwise, bending may occur near the pipe joint. Then it will resist the fluid deliver and affect the service life. Besides, be careful when you install or transport the hose. Do not drag them on sharp or rough surfaces. At the same time, do not bend or flatten them. During the use, keep the rubber pipe clean. While after each use, clean the large diameter rubber hose and avoid the impurity in. Because it will cause block and even damage the hose.